Bench Dogs Carpenter Square, Instruction Manual, Page: 4 / 6

Find the holes marked 6mm, 7.5, 9 and
12.5mm.
Turn over your carpenter square and
place so the alignment pins are touching
the edge of your sheet. This will allow
you to make accurate markings at
6mm, 7.5, 9 and 12.5mm from the edge.
Choose your desired measurement and
screw in the supplied alignment pins in
the matching marked holes.
STEP 1 STEP 3 STEP 2
CONTACT@BENCHDOGS.CO.UK WWW.BENCHDOGS.CO.UK Q E M
FOR MORE INFORMATION PLEASE VISIT
ADDITIONAL MARKINGS