S.p.A.
FT
7500
7
CAUTION:
It is advised not to keep the engine running when the
machine is not being used for its specific purpose
.
-Pics. n°4-
- Pics. n°5- - Pics. n°6-
MAINTENANCE
!
Before any maintenance or cleaning operation on the high grass mow er disconnect the
spark plug cable.
!
To change the oil or to perform other maintenance operations on the engine (spark plugs, air
filter, adjustments), refer to the engine instruction manual provided.
!
N.B. To unscrew the oil drain cap of the engine, it is necessary to tilt it sidew ays.
!
M ake a regular check of the oil in the gearbox (Pics 9 Ref. "C")
!
Every 200 hours change the oil completely by unscrew ing the oil drain cap (Pics 9 Ref. "B"). Empty
out and screw back the cap. Fill the box from cap "C" (Pics9) until the oil level just reaches the
hole. Use only recommended oil.
!
For any servicing, especially during the warranty period, seek the assistance of a dealer- authorized repair
shop.
!
M ake a regular check to verify that screw s are tightened, specifically the screw s fastening the
bar to their support. Ref.”A” Pics 10 and the threaded pins Rif.”B” Fig. 10, that fasten the
articulated blades to the blade support.
!
When the blade does not cut adequately, it should be disassembled, sharpened and balanced.
An unbalanced blade may damage the machine w ith vibrations. .
When it is very worn, replace it
with a new original one.
!
BLADE SHARPENING OPERATIONS:
8. Disconnect the spark plug cable
9. Unscrew the pins that fasten the blades (Pics10 Ref. “B”)
10.Sharpen the cutting edge area w ith an emery grinding w heel.
11.Fit the blade paying ATTENTION to the cutting edge direction of rotation, that is, looking under the
machine, counterclockw ise.
12.Connect the spark plug cable again.
