S.p.A.
FT
7500
3
IDENTIFICATION AND TECHNICAL CHARACTERISTICS
Model:
FT 7500
Weigh
:
131 Kg.
Motor:
4 tempi
Make:
BRIGGS & STRATTON
Model:
HP 8,5
Swept v olume
:
319 cc.
Max. power to driving shaft
:
8,5 HP (Kw 6,25)
Model:
FT 7500 H
W eight:
135 Kg.
Motor:
4 tempi
Make:
HONDA
Model:
GXV 270
Swept v olume
:
270 cc.
Max. power to driving shaft
:
8,5 HP (Kw 6,25)
•
Fuel for 4-stroke engine: Petrol 100/130 Octane
•
Transmission: belt-clutch w ith tightener and w orm w ith oil
bath gearbox
•
Start-up w ith self-w inding cord
•
Dry air filter
•
4-STROKE ENGINE OIL : AGIP DIESEL SIGM A SAE 30 0.6 l
•
2 forw ard speeds w ith clutch lever and 1 reverse motion
•
Blade engagement lever on handle
•
Electrical safety stop above hand clutch
•
Handle w ith vertical and transverse adjustment
•
Cutting height adjustment in 5 positions
•
Rubber w heels w ith air tube type 16/650.B” disk 5.00.8 (vespa flange)
•
Speed: first forw ard speed: 2,25 Km/h; second forw ard speed: 4 Km/h; reverse motion: 1,9 Km/h
•
Cutting w idth: c m. 65
•
It is possible to have a support w ith height adjustable w heel instead of the front bumper. (See fig.
13)
For machine identification (serial number, engine, w eight, pow er) read the data plate as show n in
the photo. See Picture 1, Ref."A".
PACKING AND TRANSPORT
◊
WIDTH: 130 cm
◊
DEPTH: 80 cm
◊
WEIGHT: 80 cm
⇒
The machine is delivered in its ow n packing.
⇒
The machine is delivered w ith oil in the gearbox.
⇒
After unpacking the high grass mow er, fasten the handle to the handle support using the screw s
provided, and adjust the height to the most comfortable position
⇒
Fasten the bumper slide by tw o screw s Ref. 15 of the picture w ith captions page 2 onto its
supports Ref. C Pics. 5. Lock it in the w ished position by means of the knob Ref. A Fig. 5.
⇒
Ensure that the blade engagement lead "D" is not tightened w hen the blade is disengaged. If it
is tightened, move the register of the tightening pulley under the hood Ref. B Pics.2
⇒
For transporting convenience, the handle may be disassembled by unscrew ing the tw o knobs
(Ref. "A" Pics 4).
⇒
During the operations of transport, it is necessary to:
1.
disconnect the blade
2.
sw itch off the engine
3.
take off the cable of the sparking plug (see ref. 18 in the picture at page 2), in order to prevent
the engine to sw itch on accidentally.
