S.p.A.
BL 45
7
MAINTENANCE
•
For the normal maintenance (oil, filter, spark plug) check the booklet for the engine included.
•
The frame has waterproof ball bearings. The transmission in the frame is engaged by two normal grease-lubricated chains.
Every year you should introduce some grease through the hole “Q” (Pict. 21) in the main body.
•
All the joints, cables and the belt stretcher should be greased from time to time.
•
Keep the machine and the tillers clean and check that all the screws and nuts are well tied, especially the screws of the tiller
(always wear protection gloves working on the tiller).
•
In case of breaking or wear the belt, you can replace it after taking off the side protection cover by unscrewing 3 knobs fixing
the side protection cover. (Pict. 9)
•
Take off the belt from the pulleys and install the new belt. After replacing the belt, adjust it to the correct tension following the
instructions in the chapter USE AND ADJUSTMENT.
•
The pin fixing the big pulley has also a safety purpose: in case of heavy obstacle, it will break avoiding damages to other
parts of the machine.
•
The replacement of the pin is very easy : you have to insert the new pin in the hole using a hammer. To take off the
protection cover, follow the instructions above.
•
For any technical repair especially during the guarantee period, it is suggested to apply to the specialised workshops of our
dealers.
WARRANTY
Our machines and accessories are guaranteed for 12 months excluding electric and rubber parts.
All the defective parts will be replaced free of charge excluding cost of labour and transport fees which would be at customer’s
charge.
For any problem regarding the engine or any other part not of our production please refer to the guarantee conditions stated by
the manufacturer and apply to their assistance centres.
For any kind of problem or repair please apply to the dealer where you bought the machine.
TESTS FOR CE CERTIFICATION
EC certificate of conformity conforming to directive 98/37/CE and the directive EMC89/336/CE modified 92/31/CE
40010 SanMatteo della Decima BO Italy Via Lampedusa n°1 Tel. (051) 820511
Declare in sole responsibility that the product CULTIVATOR
BL 45 B - BL 45 HS
, -
BL 45 K
to which
this certificate applies, conforms the basic health and safety requirements stated in the directive 98/37/CE and the
directive EMC 89/336/CE modified 92/31/CE
The laws
EN 292-1 - EN 292-2 and EN 709
have been examined to verify this conformity.
THE PRESIDENT
S.Matteo della Decima, 25/11/2002
TEST AND RESULT
TYPE
MOTORHOE
MODEL
BL 45 B - BL 45 HS- BL 45 K
Noise level at operator’s ear : Laeq = 86 dB (A)
Test condition: 1,6 mt at the centre of the handlebar
Handlebar vibration according to ISO 1033:value 3,47 m/sec²