SpA
BL 10
3
For the engine features see the engine instruction booklet delivered with the machine.
•
All engines installed on this motorised hoe have a starting system with self-winding cord, as well as exhaust pipe protection.
•
Engines installed on the BL 10 are lubricated with SAE 30 oil. Quantity of oil in engine: 0.6 lt.
•
The transmission unit is lubricated with AGIP SPGRMU00 oil - quantity 11 hg.
GENERAL SPECIFICATIONS OF THE MOTORISED HOE:
1. Vee-belt and worm screw transmission; one forward gear.
2. Forward engage/disengage lever fitted on handle.
3. Engine stop device fitted on handle.
4. Handle can be dismantled to facilitate transport.
5. Height adjustable spur.
6. Standard supply cutter of 40 cm;
7. Front transfer wheel
To identify the machine (serial number, engine, weight, and power), read the data-plate located as shown in the photo. See Ref.
“A” of Fig. N°3.
o
WIDTH: 80 cm
o
DEPTH: 40 cm
o
HEIGHT: 70cm
•
Remove the motorised hoe from its packing.
•
Install the handlebar as shown in picture 4, fitting it at the desired height as it is
adjustable in different positions, then secure it with the knob Ref. “A” (Fig. N°4).
•
Adjust the coupling and disengagement lever of the tiller (Ref.”A”, Fig. N°5) by
setting the adjuster of the cable (Ref.”B” and “C”, Fig. N°5) so that if the lever is
lifted up the engines is in the most advanced position compared to the handlebar,
whereas when the lever (Ref. “A”, Fig. N°5) is down the engine is in the position closer to the handlebar.
•
It is important that the lever is adjusted in way that it doesn’t strain immediately but only next to the stop, that is to say when
is it next to the handgrip (see Fig.6).
