background image

18

LIMITS OF RESPONSIBILITIES

Ensure strict compliance with the conditions of use, assembly, maintenance, and upkeep provided for in this manual. 

BEMOOV cannot be held liable for damages or injuries due to:

   Non-compliance with assembly and safety instructions

   Use of the bicycle in an abusive manner and beyond the use for which it was designed

   Non-conforming modifications or repairs 

   Neglected maintenance

This owner’s manual contains information updated at the time of printing. The product descriptions and photos taken cannot 

be a reason for claiming damages, even in the event of an evolution or modification of the BEMOOV product range.

WARRANTY

 

The Products are subject to a legal guarantee of conformity for goods of 2 years, which applies only to the original purchaser 

of the bicycle and on a worldwide basis.

WHAT IS COVERED:

BEMOOV guarantees the frame, fork, and components of each new bicycle, as well as accessories, for 2 years from the date of 

original purchase.

EXCLUSIONS:

   Any damage resulting from normal wear and tear of the bicycle and accessories, including the results of normal material 

 

fatigue. It is the responsibility of the owner to inspect the bike before each ride and to replace worn parts in a timely 

 fashion.

   Any damage, failure or loss caused by abuse, neglect, improper repair, improper maintenance, alteration, modification, as 

 

well as failure to follow instructions or warnings in this manual, an accident or any other abnormal, excessive or improper use, 

 

including but not limited to stunts, jumps, downhill, trial, riding with heavy loads or any other manner for which the bicycle has 

 

not been designed.

   Any damage or deterioration of the surface finish, aesthetics, or appearance of the product, not present at the time of 

 

delivery, as well as any damage or incident occurring during races or competitive events.

WARRANTY LIMIT:

BEMOOV will in no way be held liable for incidental or indirect damages or costs related to its Products.

BEMOOV’s liability is expressly limited to the repair or replacement of non-compliant goods or, at BEMOOV’s discretion,  

to the reimbursement of an amount equal to the purchase price of the defective Product.

In the event of a request for warranty intervention, the Buyer must contact our after-sales service via our website  

www.bemoov-bikes.be and follow the procedure indicated.

As soon as the Product has been received in our warehouses and our after-sales service has checked its malfunction,  

it will either be repaired by our service or replaced by an equivalent Product.

The repair time and the return time may vary depending on the time required to obtain spare parts and the transport  

conditions, we can in no way be held responsible for delays caused by these issues.

Summary of Contents for M14




















Reviews: