background image

11

   Each Bemoov bike is adapted to the weight of the child  

 

of the age corresponding to the model. Please respect  

 

the authorized weight limit:

 

BEMOOV M14: maximum 35 kg 

 

BEMOOV M16: maximum 40 kg

   Your Bemoov bicycle has been designed to be used on  

 

paved and semi-paved terrain and on smooth gravel or 

 

tarmac. It is not designed for stunts, jumps or any other 

 

extreme discipline (BMX, DIRT, DH, Slalom, Enduro…). 

 

If your child uses their bike beyond its limits, there is a 

 

real risk of failure that could lead to serious injury.

   Always comply with national legal requirements for road 

 

traffic or forest traffic. Explain these rules to your child 

 

before he/she sets out on a road or path.

   If your child rides on the road, make sure that the 

 

bicycle and the cyclist comply with the highway code of 

 

your country: reflectors, lighting, bell, helmet, etc.

   Avoid riding on roads heavily used by car traffic.

   Make sure your child always wears a suitable helmet 

 

when riding a bike.

   Make sure the helmet is properly fitted according to the 

 

manufacturer’s instructions.

   Make sure your child wears protective clothing.

   Make sure your child wears sturdy, non-slip shoes. 

 

Check that nothing can get tangled in the pedals or 

 transmission.

 

Never ride barefoot

   Make sure your child can get to know the new bike in a 

 

safe environment under your control.

   Make sure your child understands how the brakes on their 

 

bike work. Check if it can stop at all times and safely by using 

 

the brake levers.

   Avoid allowing your child to ride in wet weather and on 

 

slippery ground. Be aware that braking and tire grip 

 

performance will be significantly reduced in these 

 conditions.

   Please ensure that children are aware that bicycles have 

 

moving parts and that they cannot touch them when they 

 

are in motion. Spokes, tires, chain, gears and other 

 

moving parts can cause serious injury if contacted during 

 

movement. This risk exists even if the bicycle is not in 

 motion.

   Please ensure that your child does not carry passengers 

 

on his/her Bemoov.

   Crashes are sometimes unavoidable when riding a 

 

bicycle. As the bicycle is made up of sharp and hard 

 

metal objects, these crashes can cause injury. After a 

 

fall, first check if the child is okay. Then check the general 

 

condition of the bike and its components before the child 

 

can get back on the bike. If in doubt, please contact our 

 

technical support team via our website www.bemoov-

 

bikes.be or go to a bicycle shop for a professional 

 inspection.

  Riding with reflectors can increase your child’s visibility 

 

to other road users. Reflectors are designed to catch 

 

and reflect car headlights and other artificial lights to 

 

make the bike more visible. Reflectors do not replace 

 

lights. If your child rides at night, the bike must be 

 

equipped with a front and rear lighting system. 

 

WARNING: Riding after dark without lights or reflectors 

 

is extremely dangerous. Please check your relevant 

 

national legal road requirements.

  Never ride a bike with earphones on.

 

It is important for the rider to be able to hear what is 

 

happening in the immediate environment (cars, bells, 

 

horns, etc.). Additionally, headphone wires can become 

 

entangled in moving parts of the bike and pose a hazard.

SAFETY INSTRUCTIONS AND GUIDELINES FOR USE

If you are the responsible adult, parent or guardian, we recommend that you read the safety instructions carefully before first 

use.

A. GENERAL

Summary of Contents for M14




















Reviews: