ISSUE 1 : 03-12-18
Fig.1
10mm
100mm
Fig.2
Where appropriate please recycle packaging responsibly.
7.
NB
. Should a defect be discovered and in the event of a suite being
permanently fixed to the wall the householder will be responsible for any
costs incurred.
Installing The Mantel
1. Trial fit the mantel in the required position.
Remove any obstructions, ie. cut to shape or
remove skirting to allow the mantel to butt up
to the wall.
Note: Mantel is a two adult person lift.
2. Screw
the 2 mantel brackets (B) to the
inside of each leg using the 4 screws
provided (D -
16mm)
, making sure that the
brackets are flush with the rear of the leg.
See
Fig.1&2
3. With
the mantel in position. Lightly scribe
the wall in line with outer edges of the mantel.
Lift the mantel away from the wall. Measure
inwards from the previously scribed line the
thickness of the mantel leg plus 10mm.
See
Fig.2
4. Fix
the wall brackets (C) in place using the
appropriate fixing dependent on the type of
wall (Fixing are not supplied). Ensure mantel
brackets (B) will fall halfway between the folds
on the wall brackets (C).
See
Fig.2
5.
IMPORTANT:
If a power cable is to be routed
to the rear of the mantel. Care must be taken
not to crush or damage the cable when
positioning the mantel.
6. Lift
the mantel onto the wall brackets (C) and
confirm it is securely held in place.
If any adjustment is required take the mantel
off the wall and adjust using the slots on
the mantel brackets (B).
