6
200811_1
Operation Instructions
continued…
Fuel Bed Operation
Press the fuel bed button to select from seven different fuel bed colour options.
Fig 5.
1
–
OFF
5 - Blue
2
–
Red
6 - Purple
3
–
Sky Blue
7 - Green
4
–
Orange
8
–
Cycle between 2 and 7
Fig 5.
Press and hold button for 2 seconds to turn ON / OFF the downlights.
ON is displayed when the downlights are on.
Fig 6.
Fig 7.
Brightness Operation
The brightness setting of the flame effect can also be adjusted. This is done
by pressing the brightness button and selecting one of the following
options. Fig 8.
H
–
Maximum Setting
C
–
Intermediate Setting
L
–
Minimum Setting
Fig 8.
Note
: The last setting “8” is where the unit cycles through all seven colours.
Pressing the stops the cycling and holds the unit on one preferred
colour, a circle will be displayed. See Fig 6.
When one of these modes has been selected, this will become the default
mode when the unit is next turned on.
Note
: The brightness setting of the flame effect can only be adjusted by using
the remote control
