10
11
5. Attach the water supply
hose that comes from
the water shut off to the
bottom of the T-Valve.
6. Connect the metal
hose we supplied
to the open side of
the T-Valve.
7. Install the splice
mounting brackets tray
on the bidet body.
8. Insert the rubber
non-slip mats to the
bottom of the bidet.
9. Place the circular
mounting brackets into
the bidet attachment.
10. Place the bidet on
the toilet with the
mounting brackets
over the bolt holes
and make any needed
adjustments to make
sure the bidet is
centered on the toilet.
11. Place the toilet seat
back on the toilet over
the bidet and secure
the bolts down so that
the seat and bidet
attachment are stable.
12. Connect the hose
from step 6 to the bidet
water connection
underneath the handle
of the Wellspring 100.
INSTALLATION (CONT.)
