BEMIS BioBidet SLIM 3, Owner'S Manual

Page: 9 / 12

16 17
HOW TO USE (CONT.)
14. Seat Sensor Bypass
•
Hold the massage button for 3 seconds to activate or deactivate the seat
sensor. This will allow the seat to be used without being occupied.
15. Reset
• Hold the stop button on the side control panel for 5 seconds. The seat
will turn of after 3 seconds. Keep holding for another 2 seconds to
complete the factory reset.
16. User Preset
•
Nozzle position, water pressure, and temperature settings can be preset
and stored for 2 users.
1. Close the water valve.
2. Disconnect the water supply
hose. Take the screen filter
out and clean it with a soft
brush.
3. Return the filter after cleaning
and reconnect the water
supply hose.
4. Open the water valve.
1. Remove the power plug
from the outlet.
2. Close the water valve.
3. Press the release button
and gently pull to remove
the unit from the catch
plate.
4. Use a flat-head screwdriver
to open the drain plug.
5. The tank should be drained
when the bidet seat is not
going to be used for an
extended period of time.
MAINTENANCE & CLEANING
Screen Filter Cleaning
Draining of Tank
Cleaning Instructions
•
Avoid using harsh cleaners to preserve the plastic material of the bidet
seat. Wipe the surface with a damp cloth or neutral cleaning solution. Do
not splash water onto the power plug.