BEMIS BioBidet SLIM 3, Owner'S Manual

Page: 6 / 12

10 11
SEAT INSTALLATION
1. Remove the seat from
the existing toilet body.
•
Release the nuts, and then
remove the seat and cover.
• Store the seat in a proper
place for future use.
•
Turn off the water.
•
Remove the existing water
hose and then install T-valve
to the bottom of the toilet
tank. Ensure the rubber
washer is properly seated
and attach the original
water hose to the T-Valve.
•
To avoid damage to
product or property, do
not overtighten the
T-Valve or hoses.
2. Install the T-Valve.
Cone washer
3. Fix the catch plate onto
the toilet.
•
Point the arrow on the catch
plate towards the toilet tank.
•
Push it until you hear a “click”.
•
When the product is
not installed well, it may
cause leakage.
•
Adjust as needed before
tightening bolts. Do not over
tighten the bolts.
4. Push the main body
toward the catch
plate completely.