BEMIS bioBidet HD-7000, Owner'S Manual

Page: 14 / 17

26 27
SETTINGS
User settings with the remote control Please check the following points before requesting
repair service
Seat sensor “off” Seat sensor “on” Regardless of on/off
*The unit will work without sitting on the seat if the occupied seat sensor is
deactivated. (turn off)
*If the seat sensor is deactivated, some features cannot be controlled. (Night
light on/off, silent mode on/off, and nozzle cleaning.)
Puls
No. Function Seat
Status
Switch
Operation Description Initial
Status
1
Silent
mode “-” for longer
than 3 seconds. To turn on/off
the operating
chime sound. ON
2 Power Off “ ” for longer
than 3 seconds. Press one of Stop,
Wash, Bidet,
Intensive or Dry to
power on.
3
Seat
Sensor
Bypass “ ” for longer
than 3 seconds. Seat sensor feature
will be deactivated OFF
4 Night
Light “+” for longer
than 3 seconds. To turn on/off the
night light. ON
5
Factory
reset Press and
hold the Stop
button for 5
seconds. After 3 seconds,
the seat will power
off. Keep holding
another 2 seconds
and the seat will
power back on.
This completes
the factory
reset process. ON
6
Automatic
tank
draining “ ” and “ ”
for longer than
3 seconds. Automatic tank
draining feature will
be deactivated. OFF
Problem Check List
Completely out of order. • Check if the power plug is not connected.
•
Check if the power supply or outlet
has failed.
Water does not spray out. • Check if the water supply is turned on.
•
Check if the water valve is open.
•
Check if the nozzle is blocked by
foreign material.
•
Check if connection hose is bent.
Water pressure is low.
•
Check if screen filter is blocked and clean
if needed.
•
Check if the water pressure is set at too
low level.
Water is not
warm enough.
•
Check if its temperature is set at off or low
level, or economy mode.
Seat is not warm enough.
•
Check if its temperature is set at off or low
level, or economy mode.
Water tank is drained
intermittently.
•
Check if the automatic water draining
feature activates.
TROUBLESHOOTING GUIDE