BEMIS bioBedet BB1000, Owner'S Manual

Page: 4 / 19

6 7
WIRING REQUIREMENT
This product MUST be plugged into a regular voltage Grounded GFCI outlet
(North America 120V ac, 60Hz/ Europe 220-240V ~, 50/60Hz). The rated
power consumption is 660W/600-700W. In locations where only a standard
two-prong outlet is available, it is the responsibility of the user to install a
grounded three-prong outlet. Using a higher voltage is dangerous and may
result in a fire or other accident. This product is not responsible for damage
resulting from the use of it on other than specified voltage, or operating it
without proper grounding.
WARNING
This product must be on a separate circuit. No other appliance should share
the circuit with this product. Sharing a circuit could cause the branch circuit
fuse to blow or the circuit breaker to trip. Continuous usage under these
conditions could result in fire or property damage.
CAUTIONS BEFORE INSTALLATION
GROUNDING INSTRUCTIONS
•
This product has a three-prong grounding plug, which must be plugged
into an outlet that is properly installed and grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. If repair or replacement
of the cord or plug is necessary, do not connect the grounding wire to
either flat blade terminal. The wire with insulation having an outer surface
that is green with or without yellow stripes is the grounding wire. Check
with a qualified electrician or serviceman if the grounding instructions are
not completely understood, or if in doubt as to whether the product is
properly grounded.
• This product is for use on a nominal 120V circuit, and has a grounding
plug that looks like the plug illustrated in sketch A in Figure 1. A temporary
adapter, which looks like the adapter illustrated in sketches B and C, may
be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet (sketch A) can be
installed by a qualified electrician. The green colored rigid ear, lug, or the
like extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a screw.
THIS APPLIANCE HAS TO BE GROUNDED.
IMPORTANT SAFEGUARDS & CAUTIONS (CONT.)