background image

30

31

MAINTENANCE (CONT.)

BEFORE CALLING FOR SERVICE

 

Refer to the trial operation method to  
use this appliance again.

Prevent Freezing

1. 

Make sure the power cord is plugged in properly.

2. 

Set the temperature of water to low or middle.

  

(Freezing can be prevented by thermal efficiency of the water tank.)

  

If there is no heating system in the toilet, wrap pipes with cloth  
or other materials.

3. 

If you are not using the unit for a long time in the winter, unplug and 
drain the water from the water tank and pipes thoroughly.

 

Refer to the water drain method.

5.  Screw the Drain Bolt and Install the Appliance

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Completely 
fails to work

Is there a power outage?
Is the power cord unplugged?
Are you sitting on the  
seat correctly?

 

Check for the power cord  
failure or a tripped breaker.

 

Plug the power cord  
in properly.

 

Sit on the seat completely.

Water does 
not spray

Is the water shutoff  
valve closed?
Is the strainer clogged?
Are the nozzles clogged?
Is the water purifying  
filter clogged?

 

Check for any water  
leaking or dripping.

 

Clean the strainer.

 

Clean the nozzles.

 

Change the water 
purifying filter.

Water is 
leaking or 
dripping

Are all the hoses tightened  
up properly?

 

If water is still leaking  
or dripping, contact to  
your dealer.

Seat, water, 
or air is 
not warm 
enough

Is the temperature set to OFF?
Is the appliance used in  
Eco mode during the cold 
weather?

 

Reset the temperature.

 

Press “eco” again to  
release the function.

Summary of Contents for bio Bidet A8




















Reviews: