SETUP Parameters:
Choosing SETUP, submenue 100 is indicated.
Opening menue 100.
Un
Nominal voltage (very important!)
OV / UV monitoring, reference for step database.
Ct
CT-ratio
indication of measuring values. (enables many measuring values)
Pt
VT-ratio
important base for nominal voltage
AI
Automatic Initialising
"
chapter wrong connection
PFC PFC ON / OFF / HOLD
on, off, freezing of automatic pfc-correction
CP1 Target-cos
j
1
base for compensation target
St
Switch time delay
definition of speed of regulation
OUt Step type
definition of step type: AUTO, Fon, Foff, AL
reset of defective steps (FLty)
u
p
,
q
menue 200-600 (protected by pin,
"
Referencebook)
