The Bel XR70 is one of the most advanced
Radar Safety Detectors ever designed by
Beltronics.
The Bel XR70 includes:
• Full K, Superwide Ka & Ku radar
capability
• Safety Warning System
• Front & rear laster detection
• Varactor-tuned (VTO) microwave
receiver
• Digital Signal Processing (DSP) for
superior range and reduced false
alarms
• Patented mute and AutoMute
• Audible and visual band alerts and all
the performance you'd expect from
Beltronics.
In addition, the Bel XR70 introduces
the following revolutionary features:
• Varactor-tuned receiver provides
long-range protection against all
radar threats
• New easy-to-use Programming
lets you customize up to 7
features
• New AutoScan mode intelligently
reduces unwanted false alarms,
plus Highway and City settings
• Ultra-bright text-display provides
easy to read information from any
angle
• New Tech Display provides
actual numeric radar frequency
for any radar signal
• New Programmable Bands
(on/off), including Ku-band for
European travel.
• Detects and decodes Safety
Warning System messages
If this is your first Radar Safety Detector,
please read the manual in detail to get the
most out of your XR70’s outstanding perfor-
mance and innovative features.
Please Stay Alert
Don’t Speed
Drive Safely
Congratulations
Quick Reference Card
1
Programming Details
FFaaccttoorryy DDeeffaauulltt SSeettttiinnggss
To reset XR70 to its original factory settings, press
and hold the “CITY” and “BRT” buttons while
turning the power on. XR70’s display will provide a
“Reset” message, accompanied by an audible alert,
acknowledging the reset.
BELTRONICS XR70
Quick Reference Card
Remove card along perforations
Remove card along perforations
An example
Here is how you would turn XR70’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the CITY and BRT buttons down for 2
seconds. XR70 will beep twice and display
Program
.
2
Then hold the RVW button down. XR70
will scroll through the categories, starting
with Display
(
Pilot
), then Voice
(
Voice
),
then Power-On sequence
(
Pwr0n
),
then Signal Strength Meter
(
Meter
),
and then AutoMute
(
aMute
).
3
Release the RVW button when XR70
shows the AutoMute item.
Since the factory
setting is for AutoMute to be on, XR70 will
display
aMute 0N
.
(If you accidentally don’t release the
Review button in time, and XR70 goes to the
next category, hold the RVW button down
again, and after XR70 scrolls through all
categories, it will begin again at the top of
the list.)
4
Press the CHG button to change from
aMute 0N
to
aMute 0FF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any button.
The XR70 will display
Complete
,
beep 4
times, and return to normal operation.
There are 7 user-selectable options so you can
customize your XR70 for your own preferences.
The buttons labeled CITY and BRT are also
used to enter the Program Mode, REVIEW your
current program settings, and to CHANGE any
settings as desired. The words PROGRAM,
RVW and CHG are located on the top of the
detector, and are highlighted in graphics.
How to use Programming
11
To enter Program Mode, press and hold
both CITY and BRT buttons down for 2
seconds.
(The unit will beep twice, and will
display the word “Program”).
22
Then press the RVW button to review
the current settings
. (You can either tap the
button to change from item to item, or hold
the button to scroll through the items).
33
Press the CHG button to change any
setting.
(You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
44
To leave Program Mode, simply wait 8
seconds without pressing any button.
(The unit will display Complete, beep, and
return to normal operation).
FFCCCC NNoottee::
Modifications not expressly approved
by the manufacturer could void the
user’s FCC granted authority to operate
the equipment.
v995 manual-neltronics_310107.qxp 15/02/2007 2:57 PM Page 3
