The Bel V955 is the most advanced radar,
laser and safety detector ever designed by
Beltronics.
The Bel V955 includes full X, K,
SuperWide Ka, and Safety Warning System
radar capability, front and rear laser
detection, varactor-tuned (VTO) microwave
receiver, digital signal processing (DSP)
for superior range and reduced false
alarms, our patented Mute and AutoMute,
audible and visual band alerts, and all the
performance you’d expect from Beltronics.
In addition, the Bel V955 introduces
the following revolutionary features:
• Varactor-tuned receiver provides
long-range protection against all
radar threats
• New easy-to-use Programming lets
you customize up to 6 features
• New AutoScan mode intelligently
reduces unwanted false alarms, plus
Highway and City settings
• Ultra-bright text-display provides
easy to read information from any
angle
• Detects and decodes Safety Warning
System messages
If you’ve used a radar detector before,
a review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please read
the manual in detail to get the most out of
your V955’s outstanding performance and
innovative features.
Please drive safely.
Congratulations
Quick Reference Card
1
Programming Details
Factory Default Settings
To reset your V955 to its original factory
settings, press and hold the “CITY” and
“BRT” buttons while turning the power
on. The V955’s display will provide a
Reset
message, accompanied by an
audible alert, acknowledging the reset.
BELTRONICS V955
Quick Reference Card
An example
Here is how you would turn the V955’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. The
V955 will beep twice and
display
Program
.
2
Then hold the RVW button down.
V955
will scroll through the categories, starting
with Display (
Pilot
), then Voice (
Voice
),
then Power-On sequence (
PwrOn
), and
then AutoMute (
aMute
).
3
Release the RVW button when the
V955 shows the AutoMute item.
Since the
factory setting is for AutoMute to be on,
the V955 will display
aMute ON
.
If you accidentally don’t release the
Review button in time, and the V955 goes
to the next category, hold the RVW button
down again, and after the V955 scrolls
through all categories, it will begin again
at the top of the list.
4
Press the CHG button to change from
aMute ON
to
aMute OFF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any
button.
The V955 will display
Complete
,
beep 4 times, and return to normal
operation.
There are 6 user-selectable options so you
can customize your V955 for your own
preferences.
The buttons labeled CITY and BRT
are also used to enter the Program Mode,
REVIEW your current program settings,
and to CHANGE any settings as desired.
The words PGM, RVW and CHG are
located on the top of the detector, and are
highlighted in graphics.
How to use Programming
1
To enter Program Mode, press and
hold both CITY and BRT buttons down
for 2 seconds.
The unit will beep twice,
and will display the word
Program
.
2
Then press the RVW button to review
the current settings
. You can either tap
the button to change from item to item, or
hold the button to scroll through the items.
3
Press the CHG button to change any
setting.
You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4
To leave Program Mode, simply
wait 8 seconds without pressing any
button.
The unit will display
Complete
,
beep, and return to normal operation.
FCC Note:
Modifications not expressly approved
by the manufacturer could void the
user’s FCC granted authority to operate
the equipment.
Remove card along perforations
R
em
ov
e c
ard
al
on
g p
erf
ora
tion
s
