background image

20

21

Technical Details

How Safety Radar Works

Safety Warning System, or SWS, uses a 
modified K-band radar signal. The SWS safety
radar system has 64 possible messages (60
currently allocated). The SWS messages
your V895 can display are listed on the
facing page.

From the factory, your V895 is

programmed with SWS decoding OFF. If
SWS is used in your area, your V895 will
display the safety messages associated with
the signal. If you wish to detect this system,
use the Programming feature to turn the
V895’s SWS decoding ON.

NOTE: Some of the safety messages

have been condensed, so that each message
can be displayed on one or two screens on
the V895’s eight-character display.

Since Safety radar technology is 

relatively new, and the number of 
transmitters in operation is not yet wide-
spread, you will not receive Safety signals
on a daily basis. Do not be surprised if you
encounter emergency vehicles, road
hazards and railroad crossings that are
unequipped with these transmitters. As
Safety transmitters become more prevalent
(the number of operating transmitters is
growing every day), these Safety radar
signals will become more common.

SWS Text Messages

Highway Construction or Maintenance

1

Work Zone Ahead

2

Road Closed Ahead/Follow Detour

3

Bridge Closed Ahead/Follow Detour

4

Highway Work Crews Ahead

5

Utility Work Crews Ahead

6

All Traffic Follow Detour Ahead

7

All Trucks Follow Detour Ahead

8

All Traffic Exit Ahead

9

Right Lane Closed Ahead

10

Center Lane Closed Ahead

11

Left Lane Closed Ahead

12

For future use

Highway Hazard Zone Advisory

13

Stationary Police Vehicle Ahead

14

Train Approaching/At Crossing

15

Low Overpass Ahead

16

Drawbridge Up

17

Observe Drawbridge Weight Limit

18

Rock Slide Area Ahead

19

School Zone Ahead

20

Road Narrows Ahead

21

Sharp Curve Ahead

22

Pedestrian Crossing Ahead

23

Deer/Moose Crossing

24

Blind/Deaf Child Area

25

Steep Grade Ahead/Truck Use Low Gear

26

Accident Ahead

27

Poor Road Surface Ahead

28

School Bus Loading/Unloading

29

No Passing Zone

30

Dangerous Intersection Ahead

31

Stationary Emergency Vehicle Ahead

32

For future use

Weather Related Hazards

33

High Wind Ahead

34

Severe Weather Ahead

35

Heavy Fog Ahead

36

High Water/Flooding Ahead

37

Ice On Bridge Ahead

38

Ice On Road Ahead

39

Blowing Dust Ahead

40

Blowing Sand Ahead

41

Blinding Snow Whiteout Ahead

42

For future use

Travel Information/Convenience

43

Rest Area Ahead

44

Rest Area With Service Ahead

45

24 Hour Fuel Service Ahead

46

Inspection Station Open

47

Inspection Station Closed

48

Reduced Speed Area Ahead

49

Speed Limit Enforced

50

Hazardous Materials Exit Ahead

51

Congestion Ahead/Expect Delay

52

Expect 10 Minute Delay

53

Expect 20 Minute Delay

54

Expect 30 Minute Delay

55

Expect 1 Hour Delay

56

Traffic Alert/Tune AM Radio

57

Pay Toll Ahead

58

Trucks Exit Right

59

Trucks Exit Left

60

For future use

Fast/Slow Moving Vehicles

61

Emergency Vehicle In Transit

62

Police In Pursuit

63

Oversize Vehicle In Transit

64

Slow Moving Vehicle

17813_Vector895 Manual  3/21/05  8:18 AM  Page 23

Summary of Contents for V895

















Reviews: