Programming
There are 9 user-selectable options so you
can customize your STi MAGNUM for your
own preferences. The buttons labeled
VOLUME/MUTE and SENS are also used to
enter the Programming Mode, REVIEW
your current program settings, and to
CHANGE any settings as desired. The words
PGM, RVW, and CHG are located on the
front of the display lens, and are highlighted
in colored graphics. Pages 14-16 explain
each option in more detail.
How to use Programming
1
To enter Program Mode, press and
hold both the VOLUME/MUTE and
SENS buttons down for 2 seconds.
The
unit will beep twice, and will display the
word
Program
.
2
Then press the RVW button to
review the current settings
. You can
either tap the button to change from item
to item, or hold the button to scroll through
the items.
3
Press the CHG button to change
any setting.
You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options.
4
To leave the Program Mode, simply
wait 8 seconds without pressing any
button, or press the PWR button.
The
unit will display
Complete
, beep 4 times,
and return to normal operation.
An example
Here is how you would turn STi MAGNUM’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the VOLUME/MUTE and SENS buttons
down for 2 seconds.
The STi MAGNUM will
beep twice and display
Program
.
2
Then hold the RVW button down.
The
STi MAGNUM will scroll through the cate-
gories, starting with Display (
Disp
), Pilot
(
Pilot
), Alert Lamp (
Alamp
), Voice (
Voice
),
Power-on sequence (
PwrOn
), Signal
strength meter (
Meter
), AutoMute (
aMute
),
Brightness (
Brt
), and Bands (
Bands
).
3
Release the RVW button when the STi
MAGNUM shows the AutoMute item.
Since
the factory setting is for AutoMute to be
on, STi MAGNUM will display
aMute ON
.
If you accidentally don't release the
RVW button in time, and STi MAGNUM
goes to the next category, simply hold the
RVW button down again, the STi MAGNUM
will scroll through all of the categories.
4
Press the CHG button to change from
aMute ON
to
aMute OFF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any
button, or press the PWR button.
The STi
MAGNUM will display
Complete
, beep 4
times, and return to normal operation.
Overview of Programming
Disp STD
Disp INV
Pilot HWY
Pilot H
Pilot V
Alamp ON
Alamp OFF
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
Meter STD
Meter THT
Meter TEC
aMute ON
aMute OFF
Brt Auto
Brt Min
Brt Med
Brt Max
Brt Dark
Bands DFT
Bands MOD
X
ON
or
OFF
(default is on)
K
ON
or
OFF
(default is on)
Ka ON
or
OFF
(default is on)
POP ON
or
OFF
(default is off)
LSR ON
or
OFF
(default is on)
SWS ON
or
OFF
(default is off)
TSR ON
or
OFF
(default is on)
Press the CHANGE button
to change your setting
within a category
* Standard display
Inverted display
* Full word: Highway, AutoScan, etc.
Letter: H, A, C, or Cnx
Vehicle voltage
* Alert lamp on
Alert lamp off
* Voice alerts on
Voice alerts off
* Standard power-on sequence
Fast power-on sequence
* Standard signal strength meter
Threat Display
Tech Display
* AutoMute on
AutoMute off
* Automatic brightness
Minimum brightness
Medium brightness
Maximum brightness
All dark
* Factory default settings
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing and holding the “SENS” button
Press the REVIEW button
to go from one category
to the next
DISPLAY
PILOT
(Power-on indication)
ALERT LAMP
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
BRIGHTNESS
BANDS
*
Factory Default Settings
To reset STi MAGNUM to its original
factory settings, press and hold the
“VOLUME/MUTE” and “SENS” buttons
while turning the power on. The STi
MAGNUM’s display will provide a
Reset
message, accompanied by an
audible alert, acknowledging the reset.