Features and Specifications
Operating Bands
• X-band 10.525 GHz ±25 MHz
• K-band 24.150 GHz ±100 MHz
• Ka-band 34.700 GHz ±1300 MHz
• Ku-band 13.450 GHz ±25 MHz (Europe)
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne, Varactor-Tuned VCO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
GPS Revceiver
• SiRFstar III
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph, SpeedCheck, Threat
Display, or Tech Display
• 5-Levels of Brightness Control,
including Full Dark Mode
Power Requirement
• 12VDC, Negative Ground
• SmartCord (included)
Programming
• Power-On Indication
• SpeedCheck
• Signal Strength Meter
• AutoMute
• Units
• Voice Alerts
• Radar / Laser Bands
• Markers
Sensitivity Control
• AutoScan, Highway and AutoNoX
Auto Calibration Circuitry
VG2 Immunity
Dimensions (
Inches)
• 1.40" H x 2.90" W x 5.35" L
18
19
Specifications
Details of Programming
Voice Announcements
VoiceON
(Voice announcements on)
In this setting, all alerts and instructions
are communicated using a voice
announcement. (factory default)
VoiceOFF
(Voice announcements off)
With voice off, normal tones will be used
for alerts.
Bands
BandsDFT
In this setting all radar and laser
frequencies, (with the exception of POP
mode and Ku-band) are monitored. This is
the factory setting, and it is recommended
that you use the Pro500 in this mode.
BandsMOD
In this setting, the Pro500 will warn you
with an audible alert, and associated text
message stating which band has been
modified (i.e. “X OFF”). This warning is
displayed during the start up sequence.
WARNING: Only modify bands if
you are absolutely certain that
there are no traffic radar units
using that specific band in your
area.
Markers
MarksDFT
In this setting, all makers in the database
will be reported as you approach them.
This is the factory setting and it is
recommended that you use the Pro500 in
this mode.
MarksMOD
In this setting, only the selected Markers
will be reported.
NOTE: The Pro500 has plenty of
built in memory to store thousands of
locations. In the rare case that the
database would become 80% full, a
message will appear at start up to let
you know you’re reaching its limit.
