Beltronics Express 916, Operating Instructions Manual

Page: 8 / 25

Activating the City X Mode will not change Super
Wideband Ka, K or instant-on X band Radar alert patterns.
Note—the
cty
mode does not change the presentation of alerts
for Laser,
sws
™
or
vg-2
signals.
City ALL (X/K/Ka)-Model 926 only
City ALL provides an alternated approach for improving X,
K and Ka band selectivity and is ideal for use in areas with a
high level of microwave trasmissions which can cause falsing
on all three bands. To engage City X/K/Ka mode, press

until the Dispay shows a capital “
A
”. Once engaged, weak X, K
or Super Wideband Ka signals encountered will provide no
audible alerts until the signal strength reaches a preset level.
Visual alerts are processed the instant an X, K or Super
Wideband Ka signal is detected, keeping you quietly informed.
Reset to Factory Settings
You can reset your unit to factory settings for volume,

,

,

and Selectable Features. With the unit

, press
and hold

button then press the

and
P
/
V
buttons
simultaneously. Two “beeps” and “
F
” in the digital display,
confirm that the unit is reset to the original factory settings.
Your unit is now

and ready for operation.
Safety Warning System
®
, vg-2
Guard
®
Alert,
60 sws
™
Digital
Voice Messages (Model E926CS only) and Digital Voice
prompts for Radar/Laser/
vg-2
Guard
®
are all features which
may be selected

or

, depending upon your preference.
These Selectable Features are referenced by the digits
#

,
#

, #
3
and
#4
respectively.
Safety Warning System
®
(
sws
™
)—

#

When
on
, unit will provide an
sws
™
warning when
sws
™
transmitters are detected. Factory setting is

.

sele c table fe at u res
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 8