background image

12

13

IMPORTANT INFORMATION

Note:

Use of the unit on cars equipped with the optional Instaclear® and

ElectriClear® windshields is to be avoided entirely. These “heated
windshields” reflect radar signals and make any dash, visor or windshield
mounted detector ineffective.

Power Connection

To power Express 795, plug the small end of the power
cord, (telephone-type connector) into the modular jack on
the detector’s right side; plug the lighter plug adapter into
your vehicle’s lighter socket or accessory socket.

Express 795 operates on 12 volts DC (negative ground
only). The lighter plug provided is a standard size and
will work in most vehicles. However, some vehicles may
require the optional European sleeve to ensure a snug fit.
If so, simply call our service department to order one.
This sleeve slides over the power cord’s lighter plug
adapter. Of course, your lighter socket must be clean and
properly connected for proper operation.

Note:

depending on your vehicle, the lighter socket power may either be

continuously on, or it may be switched on and off with your ignition switch.

Optional power cords

Visit our website at www.beltronics.com for other power
cord options.

CARE OF YOUR DETECTOR

1.

Avoid placing the EXPRESS 795 in direct sunlight. The
summertime temperatures of an enclosed vehicle may
reach extremes that can cause premature aging of the
unit.

2.

Avoid exposure to water. The detector is not waterproof.

3.

Always use reasonable care when transporting your unit
from one vehicle to another.

TROUBLESHOOTING GUIDE

If your unit is not receiving power, or not operating cor-
rectly, please refer to the outline below: 

Problem

Possible Cause

Corrective Procedure

Unit Not receiving power

Plug not properly inserted

Reinsert plug and rotate

Lighter socket not clean and

Consult your car dealer 

Negatively grounded 

Fuse or electrical wiring for

Consult your car dealer

Lighter socket defective

Poor Detection Range 

Antenna/Lens opening 

Reposition unit with

partially Blocked

unobstructed view of 
Road ahead 

Partial or No Display

Dim or dark modes engaged

Disengage dim/dark modes 

Detector feels “warm”

It is normal for the detector 
to feel warm during operation

SERVICE PROCEDURES

If the Express 795 ever needs service, please follow these
simple steps: 

1.

Check the troubleshooting section of this manual. It may
have a solution. 

2.

Call the BELTRONIC S customer service 800-341-2288
department; we may solve your problem over the phone
or ask that you send your unit to the factory for repair.
BELTRONICS will provide you with a Service Order
Number which must be included on the outside of your
shipping carton. 

Please enclose the following: 

Your Service Order Number

Your name and return address

Your daytime telephone number

A description of the problem you are experiencing

Instaclear® is a registered trademark of the Ford Motor Company.
ElectriClear® is a registered trademark of Libbey, Owens, Ford, and Delco-Remy

17262_795_Manual  1/24/05  9:14 PM  Page 12

Summary of Contents for Express 795









Reviews: