10
11
visually on the display. However, no audio will be heard
until the signal strength reaches a predetermined level or
threshold.
To deactivate City mode, press the CITY button again. A
double “beep” will be heard, and the green LED marked
“C” will turn off.
Note:
City mode has no effect on the sensitivity or reception of laser
signals.
INSTALLATION
Mounting Location
WARNING:
BELTRONICS cannot anticipate the many ways the E795
can be mounted. It is important that you mount the E795 where it will not
impair your view nor present a hazard in case of an accident.
Mounting Express 795
For optimum performance, we recommend the following:
•
Using the QuickMount windshield bracket, mount your
E795 level and high enough on your front windshield to
provide a clear view of the road from the front and rear.
•
Mount Express 795 away from windshield wipers, other
solid objects, and heavily tinted areas that might obstruct
the radar antenna or laser lens.
QuickMount windshield bracket
The QuickMount windshield bracket is designed for unob-
trusive and hassle-free mounting. To install the Express
795 using the QuickMount windshield bracket, follow
these steps:
1.
Depress the adjustment button on the top of unit (by the
word BELTRONICS) and slide the QuickMount bracket
into the slot until it is locked into the position which best
fits the angle of your windshield (there are four settings
available). For extreme horizontal or sloped windshields,
the QuickMount bracket can be bent.
To ensure that the suction cups adhere to the windshield
firmly, be sure to keep both your windshield and the suc-
tion cups clean.
2.
To adjust the unit on your windshield, use the
QuickMount adjustment button located on the top of the
E795, and slide E795 forward or backward to obtain a
level position.
When installed and adjusted properly, the back top edge
of E795 should rest solidly against your windshield.
Caution!
A few vehicles (including some German manufactured vehicles)
have windshields with a soft anti-lacerative coating on the inside surface.
Use of suction cups will permanently mar this coating. Consult your
dealership or the vehicle owner’s manual to determine if your windshield
has this coating.
User’s Tip
You can leave the QuickMount windshield bracket in
place on your windshield, and easily remove your unit by
pressing the adjustment button and sliding the detector off
the mount. Again, be sure to position the bracket where it
won’t present a hazard in the event of an accident.
17262_795_Manual 1/24/05 9:14 PM Page 10
