Programming
12
There are 7 user-selectable options so you
can customize your RX55 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW (RVW) your current
program settings, and to CHANGE (CHG)
any settings as desired. The words
PROGRAM, RVW, and CHG are located on
the top of the detector, and are highlighted
graphically. Pages 14-16 explain each
option in more detail.
How to use Programming
1
To enter Program Mode, press and
hold the CITY and BRT buttons down
for 2 seconds.
(The unit will beep, and
display the word “Program”).
2
Then press the RVW button to
review the current settings
. (You can
either tap the button to change from item to
item, or hold the button to scroll through
the items).
3
Press the CHG button to change
any setting.
(You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options).
4
To leave the Program Mode, simply
wait 8 seconds without pressing any
button, or press the PWR button.
(The
unit will display Complete, beep, and return
to normal operation).
An example
Here is how you would turn RX55’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds.
The RX55 will beep twice and
display
Program
.
2
Then hold the RVW button down.
The
RX55 will scroll through the categories,
starting with Pilot (
PilotHWY
), then
Power-on sequence (
PwrOnSTD
), then
Voice (
Voice On
), and then AutoMute
(
aMute
).
3
Release the RVW button when RX55
shows the AutoMute item.
Since the factory
setting is for AutoMute to be on, RX55 will
display
aMute ON
.
(If you accidentally don't release the
RVW button in time, and the RX55 goes to
the next category, hold the RVW button
down again, and after RX55 scrolls
through all categories, it will begin again
at the top of the list.)
4
Press the CHG button to change from
aMute ON
to
aMute OFF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any button,
or press the PWR button.
The RX55 will
display
Complete
, beep, and return to
normal operation.
Overview of Programming
13
Pilot HWY
Pilot H
Pilot V
PwrOn STD
PwrOn FST
Voice ON
Voice OFF
aMute ON
aMute OFF
City STD
City LoX
City NoX
SWS Off
SWS On
VG2 Off
VG2 On
Press the CHG button
to change your setting
within a category
* Full word: Highway or AutoScan or City
Letter: H or A or C
Vehicle voltage
* Standard power-on sequence
Fast power-on sequence
* Voice alerts on
Voice alerts off
* AutoMute on
AutoMute off
* Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
* SWS detection off
SWS detection on
* VG2 detection off
VG2 detection on
Press the RVW button
to go from one category
to the next
PILOT
(Power-on indication)
POWER-ON SEQUENCE
VOICE
AUTOMUTE
CITY MODE SENSITIVITY
SWS
VG2
(radar detector detector)
*
Factory Default Settings
To reset RX55 to its original factory settings, press and hold the “CITY” and “BRT,” buttons while turning the
power on. The RX55’s display will provide a “Reset” message, accompanied by an audible alert,
acknowledging the reset.
Summary of Contents for BEL Pro RX55
Page 1: ......
