background image

Technical Details

18

Interpreting Alerts

Although the RX55 has a comprehensive
warning system and this handbook is as
complete as we can make it, only 
experience will teach you what to expect
from your RX55 and how to interpret what
it tells you. The specific type of radar being

used, the type of transmission (continuous
or instant-on) and the location of the radar
source affect the radar alerts you receive.

The following examples will give you

an introduction to understanding the
RX55’s warning system for radar, laser and
safety alerts.

Explanation

You are approaching a continuous radar
source aimed in your direction.  

An instant-on radar source is being used ahead
of you and out of your view. 

An instant-on radar source or laser source is
being used nearby. This kind of alert requires
immediate attention!

Laser is being used in the area. Because laser is
inherently difficult to detect, any laser alert
may indicate a source very close by. 

A moving patrol car with continuous radar is
overtaking you from behind. Because these
signals are reflected (reflections are increased
by large objects), they may or may not 
eventually melt into a solid point even when
the patrol car is directly behind you. 

Alert

The RX55 begins to sound slowly, then the
rate of alert increases. The Signal Meter ramps
accordingly.

RX55 emits short alerts for a few seconds and
then falls silent only to briefly alert and fall
silent again.         

RX55 suddenly sounds a continuous tone for
the appropriate band received. All segments in
the Signal Strength Meter are lit.

A brief laser alert. 

RX55 receives weak signals. These signals may
be a little stronger as you pass large, roadside
objects. The signals increase in frequency.

19

Explanation

You are approaching a radar unit concealed by
a hill or an obstructed curve.

A patrol car is traveling in front of you with a
radar source aimed forward. Because signals
are sometimes reflected off of large objects
and sometimes not, the alerts may seem 
inconsistent. 

A patrol car is approaching from the other
direction, sampling traffic with instant-on
radar. Such alerts should be taken seriously.  

You are driving through an area populated
with radar motion sensors (door openers,
burglar alarms, etc.). Since these transmitters
are usually contained inside buildings or aimed
toward OR away from you, they are typically
not as strong or lasting as a real radar
encounter.

CAUTION: Since the characteristics of these 
alerts may be similar to some of the preceding
examples, over confidence in an unfamiliar
area can be dangerous. Likewise, if an alert in
a commonly traveled area is suddenly stronger
or on a different band than usual, speed radar
may be set up nearby. 

Alert

RX55 alerts slowly for a while and then
abruptly jumps to a strong alert.

RX55 alerts intermittently. Rate and strength
of alerts may be consistent or vary wildly.         

RX55 alerts intermittently. Rate and strength
of signal increases with each alert.         

RX55 gives an X-band, or K-band alert 
intermittently.

Summary of Contents for BEL Pro RX55

















Reviews: