18
19
INSTALLATION OF THE HIGH CHAIR
Place the tray on top of the
chair's armrest, fitting it into
the slots on the side. The
tray has 3 positions. To
adjust it, press the levers on
both sides, under the base.
On the other hand, place the
table with the seat support
piece facing up.
Place the chair on the table.
The seat must fit perfectly
into the hole in the bracket.
You will notice that the
yellow button on the seat
locks into the seat support
when you hear a “click”.
This will complete the
assembly of the high chair.
Remember you can also
adjust the backrest in 3
positions according to the
desired recline. Just press
the colored button in the
back.
To remove the frame again, press the button located under
the seat and bring it up. In this way, you will be able to
separate the chair from the table again, in order to use them
separately.
NOTE:
For the assembly of both the table and the chair, make
sure that the plastic screws go straight into each hole, to ensure
that the structures are correctly assembled and have the stability
they should.
02
01
05
04
03
06
