4.
Press the
/RE/PA
button. This will automatically redial the last telephone number
you called.
5.
When you have finished with your call, either press the
button again or place the
HANDSET
on the
BASE UNIT
.
Redial Feature using the BASE UNIT
1.
Press the button.
2.
Listen for a dial tone.
3.
Press the
/REDIAL
button to automatically dial the last number you called.
NOTE:
The
HANDSET
and
BASE UNIT
REDIAL functions are independent from each other.
Cordless Telephone Operation
12
Using the Headset Feature
Your telephone can utilize a headset (not included) to be
connected to your
HANDSET
for you to enjoy hands-
free communication.
Pull out the HEADSET JACK COVER then insert the
small plug on the end of the headset into the HEADSET
JACK at the left side of the
HANDSET
. Follow the
procedures discussed in “Receiving Calls” and “Placing
Calls” to receive and place a call.
NOTE:
When you plug the headset plug into the HEADSET
JACK it automatically mutes the MICROPHONE and
SPEAKER of the
HANDSET
. Unplug the headset to
return the
HANDSET
to normal use. Headsets are
MICROPHONE
HEADSET
SPEAKER
HEADSET JACK
HEADSET JACK
COVER
HEADSET PLUG (2.5mm)
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
Extension In Use Indicator
This telephone can detect when a
HANDSET
is already
engaged from the
BASE UNIT
. The LCD Screen of all
HANDSETS
currently linked to the same
BASE UNIT
will display
“Ext in-use.”
You will have to wait until the
line is free to make a call.
TALK
SAVE
SAVE
SPEAKER
available at most retail outlets that sell telephone equipment. The HEADSET JACK is compa-
tible with 2.5 mm headset plugs only.
manual 9742.qxd 1/11/2003 11:25 AM Page 20
