9
Desk Mounting
For normal position, as shown in Figure 1, place the BASE UNIT on any desired but suitable
location.
Desk Mounting
FIGURE 1
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless telephone on a wall.
1.
With the back of the
BASE UNI
T facing up, connect the SHORT TELEPHONE LINE CORD to
the TELEPHONE LINE CONNECTION JACK.
2.
Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING
BRACKET.
3.
Insert the OUTER HOOKS of the MOUNTING BRACKET into the matching slots on the back of
the
BASE UNIT
as shown in
FIGURE 2.
4.
Push the MOUNTING BRACKET upward until the LOCKING HOOKS snaps into the inner slots
of the
BASE UNIT.
5.
Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK.
6.
Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the wall plate, so
that the opening end of the MOUNTING BRACKET matches the lower stud, then pull the
BASE
UNIT
down until it is securely seated.
MOUNTING
BRACKET
SHORT TELEPHONE
LINE CORD
1
2
3
3
4
4
OUTER HOOKS
LOCKING HOOKS
MODULAR WALL JACK
WALL PLATE STUD
WALL PLATE
FIGURE 2
FIGURE 3
5
manual 9742.qxd 1/11/2003 11:25 AM Page 17
