13
H
Heeaaddsseett FFeeaattuurree
Your
HANDSET,
when connected to a headset (not
included),
will
provide
you
with
hands-free
communication. Pull out the HEADSET JACK COVER,
then insert the small plug at the end of the headset into
the HEADSET JACK at the left side of the
HANDSET
.
Follow the procedures discussed in “Receiving Calls”
and “Placing Calls” to receive and place a call.
NOTE
: When you plug the headset plug into the
HEADSET JACK it automatically mutes the
MICROPHONE
and
SPEAKER
of
the
HANDSET
. Unplug the headset to return the
HANDSET
to normal use.
Headsets are available at most retail outlets that sell
telephone
equipment.
The
HEADSET
JACK
is
compatible with 2.5mm headset plugs only.
R
Reeddiiaall FFeeaattuurree
1. If you get a busy tone, press the
button or
place the
HANDSET
on the
BASE UNIT
to hang up.
2. Later, press the
button again.
3. Listen for a dial tone.
4. Press the
button. This will automatically redial
the last telephone number you called in TALK mode.
5. When you have finished with your call, press the
button again (the
BASE UNIT
IN USE LED
indicator will turn off) or place the
HANDSET
on the
BASE UNIT
.
NOTE
:
If you are too far away from the
BASE UNIT
, the
HANDSET
emits “beep” sounds to warn you
that the background noise level is too high for proper communication between the
HANDSET
and the
BASE UNIT
. When you hear this sound, you should move closer to the
BASE UNIT
to
reduce the noise level. Otherwise, the call will automatically cut off.
talk
talk
talk
C
Coorrddlleessss TTeelleepphhoonnee O
Oppeerraattiioonn
