6
Task
Steps
14 Intercom call from a
handset to the base unit
1. Press [Int.]
2. Press [0] to access the base unit.
3. To term inate the paging, press [EXIT] softkey or
[Int./Page] or [Bye] key.
15
Call Transfer
1. Press [Int.] on handset or [Int./Page] on base
unit while connected to an external line.
2. Press the desired handset num ber or press [0]
for the base unit.
3. Press corresponding
LINE
key on handset or on
the base unit to take back the call at any point,
or the call will be returned to you if it is not
answered within 20 seconds.
16 Conference call between
Line 1 and Line 2
1. W hile m aking or answering a call on Line1 or
Line2
2. Press [HOLD] softkey either on the handset or
the base unit to put the call on hold
3. Make or answer a second call on the other line
4. After the second call is connected, press [Conf.]
/ [Conference] to add the first caller into the
conference call
5. To end the conference call, press a LINE key to
retain the party on that line and drop the other
one, or just press [Bye] to end both lines.
For full operation instructions, please refer to
the Owner’s manual of your BS-373
BAS IC OP E RAT ION
