2
2
The new BS-371 Expandable Cordless Additional Handset is for use with the BS-373
Expandable Cordless System . You m ust have the BS-373 Expandable Cordless
System in order to use the BS-371 Expandable Cordless Additional Handset.
This manual only described the steps necessary to start up the BS-371 expandable
cordless additional handset. Please read the manual of BS-373 Expandable
Cordless System for detailed operating instruction.
BS-371 consists of the following items:
•
A Handset with Belt Clip
•
A Charging Cradle
•
A Battery Pack
•
Installation Manuals
Setup of the BS-371 Expandable Cordless Additional Handset
1. Connect the Charging Cradle to a standard 120V AC wall outlet.
2. Press the battery release point on the back of the handset and slide downward to
open the battery com partm ent.
3. Insert the battery pack into the battery com partm ent and m ake sure to position
according to polarity m arkings.
4. Slide the battery cover upward until it snaps into place.
5. Place the handset in the Charging Cradle, charge the battery pack for
at least 15
hours
prior to registering the handset to you BS-373. Make sure that the red
LED of the Charging Cradle lights, and charging begins.
Note:
1. Use only the battery indicated in this m anual. Do not dispose of batteries in a
fire. They m ay explode. Check with local codes for possible special disposal
instructions.
2. Connect the Recharge Cradle to a continuous power outlet.
3. Plug the Recharge Cradle to the socket-outlet that near the equipment and shall
be easily accessible.
4.
After initial charge
: To enhance battery life and telephone perform ance,
completely charge and then com pletely discharge the batteries before returning
the handsets to the charging cradle. This will extend your battery life allowing
longer talk-tim e and stand-by.
Registration of BS-371 Expandable Cordless Additional Handset
Your new BS-371 handset must be registered to the BS-373 base unit. The handset
will be assigned an extension number at registration, “HS-1” to “HS-8”, which will be
shown on the display.
G ET T IN G STAR T ED
