User manual ER20XS
EN
Insertion
1
Hold the cap between your thumb and
forefinger.
2
Pull your ear gently upwards/outwards.
3
Insert the earplug in the ear canal, using
a slight turning movement, until it fits
comfortably and seals the ear canal.
Removal
1
Remove the earplug by gently twisting the
cap as you pull it out.
2
Store your earplugs in the protective case
after use.
Warning
Do not use damaged earplugs, it
can affect the attenuation.
Do not disassemble the earplugs.
Do not use the earplugs if the
sound level exceeds 95 dBA for
more than 8 consecutive hours.
Always use the earplugs for the entire time
while being exposed to harmful noise.
Regularly check that your ER20XS works
as intended. Note that the effect of the
earplugs may be impaired by misuse or
poor maintenance. Therefore, follow the
recommendations strictly in this manual.
Cleaning
Wipe the tip with a damp cloth. The
product can be adversely affected by
certain chemicals. More information
is available from the manufacturer.
Warranty
The warranty is valid for 2 years from the
date of purchase at one of our dealers.
Guarantee claims can only be made
at retailers by presenting the original
receipt. The warranty does not cover
normal wear and tear, damage caused
by improper use or sound leakage.
1
Pull slider to make a loop.
2
Slide loop over the earplug.
3
Position loop against
the earplug.
4
Pull cord tight on the earplug.
Neck cord installation
1
1
Place tab on stem. Pull
down on tab until it snaps
in place.
2
Replace eartip.
Pull tab installation
Pull tab removal
1
Remove eartip.
2
Grasp tab and pull up.
2
1
2
1
2
3
4
* Warning:
These ear plugs should not be used where there is a
risk that the connecting cord could be caught during use.
