Bellini BST601X Installation & Operation Instructions Download Page 8

5

7

Installation

Positioning

This appliance must be correctly installed by a 
suitably qualified person. 

To avoid damaging your appliance.

Pans should be lifted on and off the hotplate
surface and not dragged.

Hotplates should not be switched on without
cookware placed on them. Cookware should
not be empty.

The adjacent furniture must be able 
to withstand a minimum temperature 
rise of 100°C above the ambient 
temperature of the room it is located 
in, during periods of use.

This appliance is to be built into a kitchen unit 
(depending on size) or 600 mm worktop, providing 
the following minimum distances are allowed:

600mm (minimum) between the hob surface
and the underside of any horizontal surface
above it.

50 mm clearance around the appliance and
between the hob surface and any combustible
materials.

Unpacking the appliance 

When unpacking the appliance please check 
that the following items are contained within the 
packaging: 
1 cooktop 
1 Installation and instruction manual 
4 Fixing screws 
4 Clamps 
1 Sealing strip

Getting to Know Your 

Cooktop

Congratulations on the purchase of your new
Bellini appliance.

Before using your new cooktop, it is most 
important that you read and follow the instructions 
in this use and care booklet, even if you feel you 
are familiar with this type of appliance. 

Your attention is drawn particularly to the section 
dealing with IMPORTANT SAFEGUARDS. 

Find a safe and convenient place to keep this 
booklet handy for future reference. 

This appliance has been designed to operate 
from a standard domestic power outlet. It is not 
intended for industrial or commercial use.

How to Save Energy

Using energy in a responsible way not only saves 
money but also helps the environment. So let’s 
save energy! And this is how you can do it:

Use proper pans for cooking. Pans with thick,
flat bases can save up to 1/3 on electric
energy. Remember to cover pans if possible
otherwise you will use four times as much
energy!

Match the size of the saucepan to the surface
of the heating plates. A saucepan should
never be smaller than a heating plate.

Do not uncover the pan too often (a watched
pot never boils!).

Do not install the cooktop in the direct vicinity
of refrigerators/freezers. Otherwise energy
consumption increases unnecessarily.

GSM Sales Pty Ltd ABN: 53 007 582 475  

For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ www.belliniappliances.com.au 

Model: BST601X-F Fineline: 267897 NZ Only 60cm Electric Cooktop Included in Builders Pack BPT150EE Fineline: 5103598 

Summary of Contents for BST601X
















Reviews: