7
We provide two options to install your range hood, against wall (method A) or into cabinet (method B), choose
what kind of method you want and then follow up corresponding instruction.
A: Install against wall
1. Using a spirit level mark a vertical centre line on the wall where the hood is to be positioned, and a horizontal
line where the hood base will be.
NOTE: The distance from the horizontal line to an electrical cooktop underneath must be minimum of
600mm & 650mm to a gas cook top and a maximum height of 750mm.
*If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum height for installation
2. Drill 2 holes of 8mm diameter on the wall according to below drawing.
3. Hammer
dry wall anchor plugs
into holes. Insert 2pcs
Screw(ST4x30mm)
into the 2 holes(with distance to
horizontal line 121mm) and fasten, they will be used to hang on the range hood.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
Hood base
Horizontal line
Vertical centre line
Top of hob
Minimum:
Electric 600mm
Gas 650mm
Maximum:
750mm
Where the range hood will be
Hood base
Horizontal line
Vertical centre line
121mm
510mm (60cm hood), 810mm(90cm hood)
