background image

 

3

 

Safety Instructions

 

 

 

 

Never to do: 

z

 

This range hood cannot be installed for outdoor use. 

z

 

It is prohibited to fit the range hood over a solid fuel 

stove  

z

 

This appliance must not be connected to a chimney 

or vent flue which is in use. 

z

 

This appliance is not to be vented into the roof 

cavity, must exit into open air. 

z

 

Exhaust air must not be discharged into a wall 

cavity, unless the cavity is designed for the purpose. 

z

 

This appliance should not be connected to ducting 

which ventilates rooms with fire places. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

Always to do: 

z

 

Attention should be given to ensure that any 

applicable regulations concerning discharge 

of exhaust air are fulfilled. 

z

 

This appliance should be installed and 

maintained by a suitably qualified and 

competent person in accordance with the 

relevant safety regulations. 

z

 

Before connecting the appliance to the mains 

supply, ensure that the voltage and frequency 

details on the rating plate are consistent with 

the source of supply. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for BR603SPW














Reviews: