CLEANING
REMOVING OVEN PARTS
FOR CLEANING
•
The inner door glass panel can be removed
for cleaning but it must be replaced the right
way up. If there is any writing on the glass,
you must be able to read it clearly when the
cavity doors are open.
•
Always make sure that the glass is pushed
fully into the Stop position.
•
To remove the glass panel, open the door
wide, push the clips on the left and right sides
of door bracket. Then remove the plastic top
cover. Hold the glass and slide it out along the
door bracket.
1. PUSH
2. PULL OUT
Glass
To remove the door, open the door to
the maximum angle.Then pull the
buckle at the door hinge backward.
Close the door to an angle approximately 30°.
Hold the door with one hand on each side.
Lift up and slowly pull the door out from the
oven.
•
30˚
23
