installing the appliance
Bottom view
The thickness of the Self Adhesive strip is
mm.
The width of the Self Adhesive strip is 10 mm.
'RQRWXVHDVLOLFRQVHDODQWWRVHDOWKH
DSSOLDQFHDJDLQVWWKH
7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH
DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH
SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG
3ODFHWKHEUDFNHW%RYHUWKHKROHVWKDWPDWFKWKHVL]H
of the screws.There are one set of screw holes in each
corner of the hob(H).
Slightly tighten a screw(C) through the bracket(B) so
that the bracket is attached to the hob, but so that you
can still adjust the position .
2. Carefully turn the hob back over and then gently lower it
into the aperture hole that you have cut out.
3. On the underneath of the hob, adjust the brackets into a
position that is suitable for your worktop.
Then fully tighten the screws(C) to secure the hob into
position.
(A) SEALING STRIP
(C) SCREW
(B) BRACKET
5HPRYHWKHSDQVXSSRUWVWKHEXUQHUOLGDQG ÀDPHVSUHDGHUDQGFDUHIXOO\WXUQWKH
appliance upside down and place it on a cushioned mat.
7DNHFDUHWKDWWKH,JQLWLRQGHYLFHVDQGÀDPH
supervision devices are not damaged
2. Apply the Self Adhesive strip provided around
3. Do not leave a gap in the Self Adhesive strip
the edge of the appliance.
or overlap the thickness.
590
500
in this operation.
BDGM604/
BGM604/ BGM604-F
BDGM604-F
The thickness of the Self Adhesive strip is 3 mm.
The width of the Self Adhesive strip is 10 mm.
1.5
bench top.
17
