9
Start cooking
1.
Power on the unit, the buzzer beeps once, all displays show “ – “ or “ – – “, indicating that the induction
hob has entered the state of standby mode.
2.
Touch the ON/OFF
control.
3.
Place a suitable pan on the cooking zone that you wish to use.
4.
Touching the heating zone selection control , and a indicator next to the key will flash
5.
Adjust heat setting by touching the “-” and “+”.
NOTE:
If you don’t choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will
need to restart from step 2.
You can modify the heat setting at any time during cooking.
Your induction cooktop can automatically detect if the pan you placed is suitable or not, when display
flashes then the pan is not suitable for this appliance.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off
2.
Turn the cooking zone off by scrolling down to” 0” or touching”-“ and”+”
control together. Make sure the display shows”0”
3.
Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if you want to heat further pans, use the
hotplate that is still hot.
GSM Retail Australia
Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199
Aust OR 0508123108 NZ
www.belliniappliances.com.au
Model: BDC302TG Fineline: 5103057 30cm Built In Ceramic Cooktop
