9
Hob
The following symbols will appear on the control knob, next to each other:
•
The minimum setting is at the end of the anti-clockwise rotation of the control handle.
•
All operation positions must be selected between the maximum and minimum position.
•
The symbol on the control panel,next to the control handle will indicate which burner it operates.
Automatic ignition with flame failure safety device
To light the burner, push the relevant control knob down and turn it anti-clockwise to the large flame
position. Wait for the gas to light and keep the control knob held down for 10 seconds after the flame
has lit, to allow time for the flame failure safety device to warm up, before releasing the control knob.
If the burner fails to light, turn the control knob back (clock-wise) to the off position. Wait for 60 seconds
before attempting to ignite the burner again.
Fitting burner caps and heads (Gas Hobs)
angled
parallel
burner cap
burner head
burner cap not central
Pan placement
Always make sure that your pans are placed centrally on top of the pan support and do not allow the
flame to extend over the base of the pan.
Ignition position
