Belling BI602FPCT, User Manual

Page: 15 / 24

15
Removing the door from oven (optional)
1. To remove the door, open the door to the maximum angle. Then
pull the catches on each hinge forward towards you.
2. Close the door to an angle approximately 30°. Hold the door with
one hand on each side. Lift up and slowly pull the door out from
the oven. Do not lift the door assembly by the handle.
3. When the door is fully open or has been removed from the main
body of the oven, you will see black latches on the left-hand-side
and right-hand-side close to the hinges. Carefully push these
latches outward.
4. Lift up the door inner glass and pull it out, then take the door
middle glass out in the same way. Please take care when
removing the glass panels while the door is still attached to the
oven as the door may spring back when the weight of the glass is
removed.
To reassemble, follow the instructions in reverse, ensuring the glass is re-installed the right way up, the
hinges are aligned with the hinge receivers and locating cables are in the fully home position.
WARNING: Do not forcibly pull on the oven door as this could result in the glass shattering during the
dismantling process.
WARNING: The hinge springs could loosen, causing personal injury. Do not touch the hinges.
WARNING: Do not lift or carry the oven door by the door handle.