EN - 15
• During installation, please ensure
that
insulated
cables are used. An
incorrect connection could damage
your
appliance. If the mains cable is
damaged
and needs to be replaced
this should be
done by a qualified
personnel.
• Do not use adaptors, multiple sockets
and/or extension leads.
• The supply cord should be kept away
from hot parts of the appliance and must
not be bent or compressed. Otherwise
the cord may be damaged, causing a
short circuit.
• If the appliance is not connected
to the mains with a plug, a all-pole
disconnector (with at least 3 mm contact
spacing) must be used in order to meet
the safety regulations.
• The appliance is designed for a power
supply of 220-240 V~. If your supply is
different, contact the authorized service
personnel or qualified electrician.
• Ensure all connections are adequately
tightened.
• Fix the supply cable in the cable clamp
and then close the cover.
• The terminal box connection is placed
on the terminal box.
• Green/Yellow (Earth) wire to the
terminal
marked "PE".
• Brown (
Active
) wire to the terminal
marked "L".
• Blue (Neutral) wire to the terminal
marked "N".
2.6 Safety Chain
The appliance can be prevented from falling
over by securing the supplied safety chain
to the rear of the cooker.
Use a wall plug to fasten the hook (1) to the
kitchen wall and connect the safety chain
(3) to the hook with the help of the locking
mechanism.
1
2
3
4
5
6
1-
Hook
2-
Locking mechanism
3-
Safety chain (mounted to appliance)
4-
Tightly fix chain to cooker rear
5-
Rear of cooker
6-
Kitchen wall
The safety chain should be as short as
practically possible to avoid the cooker
tilting forward.
4
4
N
N
PE
PE
L2
L3
L1
L
5
5
3
3
2
2
1
1
