Belling BDC64INF, Instruction Manual

Page: 9 / 28

9
Control panel
USE OF THE APPLIANCE
Sensitive touch
Your induction hob is equipped with electronic controls with sensitive touch keys. When your
finger
presses the key, the corresponding command is activated. This activation is
validated by a control light, a letter or a number in the display and/or a “beep” sound.
In the case of a general use press only one key at the same time.
Display
Designation Display
Zero 0.
Power level 1…9
No pan detection U
Heat accelerator A
Error message E
Residual heat H
Power P
Locking L
Keep warm U
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The booster power is activated.
Control panel locking.
Maintain temperature of 70°C.
The cooking is paused. Stop&Go II
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed. The fan changes
to a higher speed when the hob is intensly used. The cooling fan reduces its speed and stops
automatically when the electronic circuit has cooled enough.
Keep
warm key
Power key
Power display
Control light
cooking zone
Control light timer
Timer display
Power selection zone “SLIDER”
and timer setting zone
Control light
on/off
Control light
Stop & Go
On/off key Stop & Go
key