4. Using the Camera and Changing Settings
21
4.4.5 Screensavers
This setting controls the amount of time before the screen turns off to save
power.
1. In Setup Mode, use the UP or DOWN buttons to select
‘Screensavers’
and press the PHOTO button to enter the
‘Screensavers’
submenu.
2. Press the UP or DOWN buttons to navigate the menu and then press the
PHOTO button to confirm your selected setting (1 Minute, 3 Minutes, 5
Minutes, Off).
4.4.6 Volume
This setting controls the volume level of the
camera’s speaker output.
1. In Setup Mode, use the UP or DOWN buttons to select
‘Volume’
and
press the PHOTO button to enter the
‘Volume’
submenu.
2. Press the UP or DOWN buttons to navigate the menu and then press the
PHOTO button to confirm your selected setting (0, 1, 2, 3, 4, 5, 6, 7, 8).
4.4.7 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz.
Please check the frequency of your location and set accordingly.
1. In Setup Mode, use the UP or DOWN buttons to select
‘Frequency’
and
press the PHOTO button to enter the
‘Frequency’
submenu.
2. Press the UP or DOWN buttons to select your desired frequency. Then
press the PHOTO button to confirm your selection (
50Hz, 60Hz)
. The
default frequency for the United States is 60Hz.
4.4.8 Format
The format setting erases all photos, videos and data stored on your
memory card.
1. In Setup Mode, use the UP or DOWN buttons to select
‘Format’
and
press the PHOTO button to enter the
‘Format’
submenu.
2. Press the UP or DOWN buttons to select your desired selection, press
the PHOTO button for your selected setting (Cancel, OK).
NOTE: This will delete all of your media and cannot be undone.
