background image

33

Safety

3.1

Safety instructions for installation

Caution:
• The appliance must be installed as a 'room sealed system' appliance by a

certified and registered gas installation engineer in accordance with the

supplied installation instructions, and nationally and locally applicable

regulations.

• If you have any questions regarding the installation, consult your local gas

company.

• Only use items in the installation that are specified in this manual and the

related documents.

• Only use the following brands for the installation of the concentric flue

system:

Manufacturer

system

Bellfires

Muelink & Grol system

Poujoulat

DUOGAS system

Ontop

Metaloterm US system

Jeremias/STB (STB = Schoorsteen

Techniek Brummen NL)

H-Twin system

Jeremias

TWIN-GAS system

• Do not use a combination of parts from different brands for the installation

of the concentric flue system.

• Before beginning the installation, check that the details on the rating plate

correspond to the gas type and supply pressure to which the appliance will

be connected.

Safety

6

Smart Bell 65-55

Summary of Contents for Smart Bell 65/55 MF

















































Reviews: