Bellfires Free Bell Installation Instructions And Instructions For Use Download Page 39 | Manualshive

Page: 39 / 56

Bellfires Free Bell Installation Instructions And Instructions For Use Download Page 39

39

Bell

fi res

English

Instructions for use and installation instructions

Figure 17: Log set Free Bell

(Natural gas and propane)

PROPANE APPLIANCE:

1 Place the ceramic mat on the burner in such a way that the holes in the mat are in

line with the burner openings.

2 Remove the embers (

2

x 100 gram) carefully from their packaging and spread them

evenly over the burner mat (not on the holes) and the grate around the burner.

Please make sure that all burner orifi ces (small holes) are kept unblocked!

Note

!

Small embers and their residue should not be scattered on

the burner.

This can cause a blockage on the burner orifi ces.

3 Place the logs on the burner. See fi gure 17.

Note !

Do not place any logs above the burner openings!

Please make sure that all burner orifi ces (small holes) are kept

unblocked!

Keep the burner orifi ces unblocked

Embers and logs must not be placed
next to the pilot light burner

«
...
37
38
39
40
41
...
»

Summary of Contents for Free Bell

























































Reviews:

No comments