Bellfires® BSV
25
Smoke Dome and liner wiched into
place, just a few inches above from
where it will be lowered onto the
installed Bellfires® firebox. The card-
board template can be used to check
for placement of the firebox and to be
sure the Smoke Dome can be lowered
and properly seated on the firebox.
Now you can prepare the firebox for
installation.
Winching the
preattached
Smoke Dome
and liner into
place.
Carefully look over the refrac-
tory firebox and flares to
check for uneven bumps, etc.,
anything that might prevent a
smooth joint and a tight seam
between the rear firebox panel
and side flares. A grinder can
be used to sand down any
imperfections.
See Catalog for:
4 ” Sander-Grinder
pg. 90
Summary of Contents for BSV 19
Page 7: ...Bellfires BSV 19 Exploded View 7 BSV 19 18 15...
Page 12: ...Bellfires BSV 12...
Page 40: ......
