background image

7

USER INSTRUCTION (CONTROL PANEL)

Power ON / OFF

Press the power button to turn on the unit. Press again to turn off the unit.

NOTE: There is a thermostat limiter inside the unit. When the inner temperature is too hot, the unit 

will automatically turned off to avoid damage to the product or risk of fire.

Control Panel

The control panel is located on the top right corner of the unit.

•  DO NOT unplug the unit when it is still “ON”

CAUTION / WARNING

Display

Timer Control

Function Indicator

Heater Control

Flame Control

Power Button

Flame Control

Press the flame control button to rotate and set flame effect levels. The flame setting are as 

follows.

Button Press

Display Value

Flame Level

Fireplace Appearance

1st press

L4

High

Highest Flame, Highest Logs Glow

2nd press

L3

Medium

Medium Flame, Medium Logs Glow

3rd press

L2

Low

Low Flame, Low Logs Glow

4th press

L1

Flame Off

Flame Off, Highest Logs Glow

5h press

None

All Off

All Off

To lock the flame function, press and hold the flame button for 5 seconds when the flame in L4 

mode. The log lights will flash 5 times to indicate the flame function is locked. Press the flame 

control button to rotate the logs glow effect. The logs glow setting are as follows.

Button Press

Display Value

Flame Level

Fireplace Appearance

1st press

L4

Flame Off

Highest Logs Glow

2nd press

L3

Flame Off

Medium Logs Glow

3rd press

L2

Flame Off

Low Logs Glow

4th press

L1

Flame Off

Highest Logs Glow

5h press

None

All Off

All Off

To unlock the flame function, press and hold the flame button for 5 seconds.

Summary of Contents for 050-HA-50100













Reviews: