Bellelli Eos, Manual

Page: 12 / 78

sides of the child seat (fig. 15).
Position the child in the seat.
Unite the buckle clips.
Insert the united clips into the buckle (E). A click
indicates correct closure of the buckle (fig. 16).
Pull the front adjuster strap (B) to tighten the
child seat harness straps on the child (fig. 17).
Position the padding (F) on the shoulders and
chest of the child (fig. 18).
Warning: during the journey, periodically
check that the child is still correctly
strapped into the seat.
How to unfasten the child
Press the adjuster button (C) and
simultaneously pull both harness straps of the
child seat (G) to slacken them.
Press the red button on the buckle (E) to open it.
Separate the harness straps and move them
away from the child.
Maintenance
Remove the cover (H) completely to wash it.
To remove the cover:
Press the red button on the buckle (E) to open it.
Remove the buckle padding (D).
Release both safety harness straps from the T-
shaped metal clip (M) positioned behind the
back rest of the child seat.
Pull out the straps from the backrest and
padding.
Pull out both metal clips (L) from the backrest.
Remove the cover from the plastic housing of
the adjuster (C).
Pass the strap (G) through the slit in the cover.
Lift off the polystyrene.
Release the elastic straps holding the cover in
place.
Put the polystyrene back in the shell to avoid
any damage to it.
Repeat the above procedures in reverse
order to refit the cover.
Warning: after refitting the cover, carefully check
that the straps and padding are correctly fitted.
Follow the washing instructions on the label
attached to the cover.
Wash plastic parts with warm water and soap.
Do not use aggressive cleaning products.
Warning: the cover is an integral part of the child
seat. The child seat cannot be used without it.
Covers may only be replaced with original spare
parts.
Guarantee
The conditions of the guarantee can be seen on
our web site: www.bellelli.com.
EN
10