Bellelli B-FIX, Manual

Page: 14 / 44

14
B-FIX FRONT SEAT - EN
Congratulations and thank you for the purchase of your new bicycle seat. If you would like informa-
tion about other Bellelli products, visit our website: www.bellelli.com.
These instructions apply only for Bellelli front seats.
Read the installation and operating instructions carefully before you install the seat and use it. Do not
mount the seat by following only the pictures on the cover.
Keep the manual for possible, future reference.
NOTES
WARNING: The seat is designed exclusively for transporting a child. Do not add any other loads to
the seat. Any additional loads must be attached on to the back of the bicycle by using other supports,
such as a rear luggage carrier.
WARNING: Any change to the seat or its mounting support is prohibited. The manufacturer and the
retailer are not responsible for possible damages due to changes.
WARNING: The manoeuvrability of the bicycle may vary significantly with a child in the seat, in
particular regarding balance, steering and braking.
WARNING: Never leave the bike parked and unattended with a child in the seat unattended.
WARNING: Never use the seat if any part of the seat or of the bicycle is broken or missing. Contact
the manufacturer or dealer to purchase necessary spare parts for the seat. Replace the seat after
any accident even if it has no visible damage.
GENERAL INFORMATION ABOUT ASSEMBLY
The bicycle front seat for children is to be mounted between driver and handlebars.
Install the seat facing the direction of travel.
The mounting support is suitable for a frames with a round cross section as well as a variety of frame
with an oval cross section. Carefully read the section “Mounting support installation ”.
The seat is equipped with a mounting system with support fork.
Use the seat for 26 “-28” bikes in order to withstand the additional loads of at least 18 kg (39.7 lb).
Consult the user’s manual of the bicycle or your dealer.
Always attach the child’s straps and the foot straps. Check carefully and regularly that the child is
properly secured in the seat. Carefully read the section “Placing the child in the seat ‘.
Do not mount the seat leaning forward. Tilt it slightly backwards, to better hold the child.
With the seat mounted, check your bike regularly and pay attention particularly to the tires, brakes
and lights.
GENERAL INFORMATION ABOUT USAGE
Before using the product check over the highway code of the country in which it is being used.
The bicycle front seat is suitable for children with a maximum weight of 15 kg (33lb). Do not use the
seat if the weight of the child is more than the approved amount.
Regularly check that the weight of the child does not exceed this limit.
For use only with children who are able to sit for a long time alone and without help (as of roughly 9
months old).
Do not use the seat on motorcycles, scooters, mopeds, racing bikes and bikes with suspension.
EN EN